Homemade Machines & Jigs
-
How To Sharpen A Saw Blade
Dull saw blades? Sick of sending them out? In this article I use a diamond wheel on my table saw to sharpen carbide saw blades to ...
-
Spindle Sander Rebuild
The spindle sander I have has served me well in the 10+ years I’ve owned it. And other than wanting to experiment with makin...
-
Low Speed Grinder Experiment
I can’t recall where I saw it, but this idea is based on a commercially available product that works in the same way. That o...
-
Making A Dowel Joiner
I bought a cordless trim router a little over a year ago especially for this project. Yes, it sometimes (often) takes that long to...
-
Making A Chisel / Plane Iron Sharpening Jig
Need sharp chisels? Planes? Who doesn’t, right? This jig is the answer. It not only makes these tools insanely sharp, it als...
-
Making A Simple Drill Press Table
I made this drill press table about nine years ago: And I’m rewriting this article to replace the original one I wrote back ...
-
Making A Tenon Jig For The Table Saw
The great thing about making your own tools and jigs is the ability to either change them to fit a new situation, or build them ov...
-
How To Make A Precision Miter Sled (Updated)
My miter saw station is my go-to tool for making accurate square and angled cuts on narrow stock. It can handle boards up to aroun...
-
How To Make A Table Saw Miter Sled
I’m filing this one in the experimental category because, even though it works well, it’s far from optimal. My lack of...
-
Making A Mini Table Saw Sled – Deluxe Version
When I made the original mini table saw sled, I basically just grabbed some scrap plywood and threw it together without much atten...
-
Making A Norm Abram Style Cross Cut Sled
A few years ago I made this Norm Abram style (so called since he’s the only person I’ve seen using this type) and it h...
-
Making A Wooden Table Saw Fence
This is a project that is kind of a subsystem of the wooden table saw that I will be building in the near (ish) future. For now, i...
-
Making A Wooden Table Saw – Part 3
Continued from part 2… Progressing with the wooden table saw build, I decided to mount the switch on the outside of the cabi...
-
Making A Wooden Table Saw – Part 2
Continued from Part 1… When I changed the lift slot from straight to curved, I went too far, so I fixed that with two more f...
-
Making A Wooden Table Saw
Yes! Another oneThis one is a bit different in that it will be a “real” table saw that uses a real table saw arbor. Th...
-
How To Make A Straightedge Guide
A project on my to-do list for a long time has been a self-clamping straightedge guide made from wood. Years ago I had a retail ve...
-
How To Make A Self Centering Bit – Vix Bit
A self centering bit (also known as a vix bit) can be a handy thing to have if you are installing a few door hinges or other types...
-
How To Make A Sander
To get started on this sander project, I located a suitable motor. This is from a pedestal style sump pump (shown below) and these...
-
Making An Edge Banding Trimmer Attachment
This is kind of a followup on a project I did in 2012, an edge banding trimmer that was stationary and sized to fit on the end of ...