Precision Router Lift
Ready to mount in the table of your own design or extension wing of your table saw, this is a simple, easy to build and very smooth acting router lift. Super fine adjustment is possible and the lift has a total vertical range of 3-1/2″.
All of the components are commonly available, with no special parts to make. The majority of this router lift is constructed from 1/2″ (12mm) and 3/4″ (18mm) plywood, using standard hardware.
The detailed construction article for this lift is here.
Here are the overall dimensions of the lift:
The crank and locking knob can be any distance from the unit by increasing the rod length.
Plans include a materials list, 1/2″ plywood cut diagram, one overview drawing and a parts map. There are 14 detailed parts dimension pages and 11 step-by-step assembly pages:
Showing each individual part and each assembly step in detail.
For your convenience, this router lift plan is made with both imperial and metric dimensions, with the metric dimensions (millimeters) in brackets. Screw sizes and other hardware are in imperial units.